helical worm gear motor

helical worm gear motor
Helical-worm gearmotors
Due to their design and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. Also, they are extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: gear unit combination optimized regarding efficiency
Do you anticipate a drive option to impress you using its high level of overall performance and efficiency? In that case, we’d recommend our high-quality helical-worm gearmotors EP for you. These can be implemented separately in the modular program. In this way, they offer you a massive range of sizes, equipment ratios and engine sizes.
However, their greatest strength is definitely their running smoothness and their extremely low noise development. One thing is certain – With the helical-worm gearmotors EP you are choosing a robust drive solution which you will hardly even hear.
The overall concept offers you many more practical product characteristics and benefits. These include the significantly higher efficiency of the helical-worm combinations instead of single helical-worm gear models. This is one way you save extra energy in the procedure of your systems and are able to noticeably decrease ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide selection of AC motors. In addition, you can freely configure all of the relevant properties. In this way, you can effectively make use of all the benefits provided by this mixture of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance can be achieved because of the optional flange or foot-mounted design and by selecting between solid and hollow shaft.
Save money and time
By opting for among our gearmotors, you are already saving time and money with this selection and task planning. It is because our modular system enables a multitude of mixture options for gear systems and motors. You can therefore reduce operating costs, count on a long service life and reap the benefits of simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional sturdiness and long service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear systems are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Because of their outstanding efficiency, these drives can be utilized in every industrial sector and customized to person torque and swiftness requirements. The decrease ratios afforded by the helical-worm gear stage and the reduced noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique mixture of optimized worm wheel material with particular lubricants, optimized form, this powerful electric motor achieves high levels of performance and torque. The casing machined on all sides allows diverse mounting options. Double chamber shaft seals are utilized as standard.
The low contour design makes it ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and ground worm gears: Provides higher efficiencies and better torque capacity in smaller sizes.
Multiple Input Options: Essential gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, installation pilots and flanges provide an array of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Will keep contaminants and water out.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements plus modular design to simply accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors set new standards for reliability, efficiency and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration today and a really future proof solution. The EP gear motor offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box can be mounted in choice positions rotated in 90º steps around the electric motor frame providing for unparalleled integration opportunities.
EP gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a true total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dirt tight and hose proof,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Because of the unique combination of optimized worm wheel materials with special lubricants and optimized form, this powerful geared engine achieves high degrees of efficiency and torque. The reduced contour design helps it be ideal for implementing applications electronic.g. in the food industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with long life performance features and simplified maintenance. The use of condition of the artwork helical and worm equipment combinations affords optimum overall performance fulfilling a wide variety of ratio requirements. The 800 BR is definitely functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All units shipped pre-lubed for your unique installation position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting result shafts
Dual and triple reduction ratios
Flanged or foot mounted
All units adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced alternate for the standard jobs anticipated of a right-angle drive.
5 equipment sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is on the motor shaft. This integrated small design is an essential aspect for the high accuracy and the amazing stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are produced from case hardened alloy metal and the flanks are precision ground. The worm wheels are made from particular wear-resistant bronze. Helical worm gears include a helical gear. Worm gears with shrink disc, torque limiter, along with adjustable backlash styles are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal design. The housings are produced from high quality cast iron. The rugget walls and inner ribbing ensure extremely torsional stiff and noise dampening housings. The exterior ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with durable walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,along with adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG