Worm drive gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 electric motor. Ideal applications where an easy to fit, high torque output is required. Ideal for student based jobs which includes robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. cutting down to size. The motor is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little strolling robots, lifting mechanisms, and various other applications where excessive torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Motor overheating can be due to excessive stalling, even at very low voltages. We advise that you use stall-detection sensors, or simply view your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on small threaded end of the shaft, although it is not specifically intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new specifications for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration now and a really future proof alternative. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange alternatives. The electric motor terminal box can be mounted in alternate positions rotated in 90º steps around the engine frame offering for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total solution for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the alternative for applications requiring a corner turn, optional dual result, or an inability for the engine to be back driven. The DC right angle equipment motors are made for continuous and intermittent duty procedure. Our right angle gear reducers are designed with many mounting plate choices, making them perfect for a variety of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are great for applications that want a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power used. On top of that, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision slice gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Seats / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and produce a Worm Gear Electric motor that will optimize the efficiency of your specific application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Trim / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for durability and a higher torque output. Due to the special mechanical framework of the worm get the engine output shaft is certainly self locking and can not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Ranked voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially display their strength in applications where great gear ratios are essential. Our worm geared motors are for that reason optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its unique requirements. The EP series worm gear motors could be quickly and effectively adapted to fulfill your needs.
Worm gear models impress with their great power density and compact design. If required, we are able to also source them with the highly effective nsd tupH surface treatment.
In addition to the basic EP housing, you can expect an extensive type of bolt-on components to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be pleased to assemble the individual components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear systems feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for harsh and demanding industries like meals processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have got on all sides diverse fixing possibilities and enable an easy assembling for the client.
Additional drive configurationscan be created by use of built-about components (e.g. torque arm and output flanges). The housings are made in light weight building out of aluminium die cast. Motor attachment is realised generally by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm huge, 40mm high, a good robust worm travel gearbox powered by an MM28 electric motor (included), most suitable for applications where a simple to match, high torque end result is required, nylon housing and equipment, requires light oil or silicon grease lubrication, perfect for student based tasks including robots and buggies.
Most suitable for applications where a simple to fit, high torque end result is required
Perfect for student based tasks including robots and buggies
Reversible Great torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Huge torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The motor is Gear DC electric motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that is, regarding motor without electrical, the result axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely an improved option when compared to spur gear motor. How come worm gear so particular? Check this wiki out: Worm Get.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs result shaft) isn’t reversible when working with large reduction ratios, because of the greater friction involved between your worm and worm-wheel, when usually a single start (1 spiral) worm is used. This is often a advantage when it’s desired to remove any possibility of the result driving the input.”
In other phrases, it is difficult to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g