Product Description
Advance Marine Gearbox 300 for Boat and Ship, with list of Advance gearboxes as below:
Model | Max Power Input (hp/rpm) |
Speed Rang (rpm) |
Reduction Ration | Weight | Compatible Engines |
06 | 12.5/2100 | 1000-2100 | 2.52/3.05/3.50 | 58kg | Yanmar TS130/TS155 Hatz E786 |
HC038A | 1500-2300 | 1.51 2.03 2.52 2.92 3.45 | 70 | ||
16A | 33/2000 | 1000-2000 | 2.07/2.48/2.95/3.35/3.83 | 84kg | MWM D226-2, Hatz 3M31 |
26 | 1000-2500 | 2.5/3/3.5/4 | 92 | ||
MA100A | 37/3000 | 1500-3000 | 1.6/2/2.55/3.11/3.59/3.88 | 75 | Isuzu UM02AB1, CHINAMFG ME125 |
MA125 | 82/3000 | 1500-3000 | 2.03/2.46/3.04/3.57/4.05 /4.39/4.7 |
115 | Isuzu UM02AB1, CHINAMFG ME125 |
MA142 | 102/2500 | 1500-3000 | 1.97/2.52/3.03/3.54/3.95/4.5 | 140 | Cummins 4BTA3.9-M MWM D226-4 |
40A | 82/2000 | 750-2000 | 2.07/2.96/3.44 | 225 | Yanmar ME400L, Baudouin 4D |
MB170 | 132/2500 | 1000-2500 | 1.97/2.52/3.04/3.96/4.5/5.06 /5.47/5.88 |
240 | MWM D226-6, CHINAMFG ME400L |
HC65 | 163/2500 | 1000-2500 | 1.53/2.03/2.5/2.96 | 130 | 6BT5.9-M |
HCU65 | 1000-2200 | 2.045/2.5/3.068/3.427 | 260 | ||
120B | 750-1800 | 2.03/2.81/3.73 | 400 | ||
120C | 340/2500 | 1000-2500 | 1.48/1.94/2.45/2.96/3.35 | 225 | Cummins NT855-M240, CAT 3208TA |
MV100 | 408/3000 | 1500-3000 | 1.23/1.62/2.07/2.52/2.87 | 220 | NT855-M240, MWM D234 V8 |
MV100A | 1000-3000 | 1.23/1.28/1.62/2.07/2.56/2.87 | 220 | 7 degrees down angle | |
135A | 272/2000 | 1000-2000 | 2.03/2.59/3.04/3.62/4.11/4.65 /5.06/5.47/5.81 |
470 | NT855-M240, CAT 3406 |
HCQ138 | 390/2600 | 1000-2600 | 1.03/1.5/2.03/2.48/2.95 | 200 | NT855-M240, CAT 3406 |
HC138 | 375/2500 | 1000-2500 | 2/2.52/3/3.57/4.05/4.45 | 360 | 6135Ca, NT855-M240 |
HCD138 | 375/2500 | 1000-2500 | 5.05/5.63/6.06/6.47 | 415 | 6135Ca, NT855-M240 |
HCA138 | 390/2600 | 1000-2600 | 1.095/1.28/1.5/2.03/2.52/3 | 200 | NT855-M240, MWM D234 V8 |
MB242 | 350/2500 | 1000-2500 | 3.04/3.52/3.95/4.53/5.12 /5.56/5.88 |
385 | NT855-M240, CAT 3406 |
HC200 | 440/2200 | 1000-2200 | 1.48/2/2.28 | 280 | NT855-M240, CAT 3406TA |
HC201 | 500/2500 | 1000-2500 | 2.46/2.955/3.526 | 350 | 6135ZLCa, CHINAMFG NTA855-M400 |
HCV230 | 1000-2200 | 1.485/1.956/2.483 | 450 | ||
MB270A | 500/2500 | 1000-2500 | 4.05/4.53/5.12/5.5/5.95/6.39/6.82 | 675 | NTA855-M400, CAT 3406TA |
HCQ300 | 782/2300 | 1000-2300 | 1.05/1.46/2.05/2.38 | 350 | KTA19-M600, 3412T, TBD234 V12 |
HC300 | 700-2500 | 1.5/1.87/2.04/2.23/2.54/3/3.53/ 4.1/4.47/4.61/4.94/5.44 |
680 | ||
300 | 805/2300 | 1000-2300 | 2.04/2.54/3/3.53/4.1/4.61/4.94 /5.44 |
740 | KTA19-M600, TBD234 V12 |
D300 | 805/2300 | 1000-2300 | 4/4.48/5.05/5.52/5.9/6.56/7.06 /7.63 |
940 | KTA19-M600, TBD234 V12 |
T300 | 759/2300 | 1000-2300 | 4.95/6.03/6.65/7.04/7.54/8.02 /8.47 |
1120 | KTA19-M600, 3412T, TBD234 V12 |
T300/1 | 611/2300 | 1000-2300 | 8.94/9.45 | 1120 | KTA19-M600, 3412T |
J300 | 750-2500 | 2.04/2.54/3/3.47/3.95 | 740 | ||
HCA300 | 850/2500 | 1000-2500 | 1.5/2/2.57/2.95 | 370 | KTA19-M600, 3412T, TBD234 V12 |
HCA301 | 1000-2500 | 1.5 2 2.57 2.95 | 370 | ||
M300 | 850/2300 | 1000-2300 | 1.45/2/2.52/3.05/3.45/3.94 | 700 | KTA19-M600, TBD234 V12 |
HCQ401 | 1000-2300 | 1 1.12 1.25 1.5 1.76 2.04 2.5 | 480 | ||
MD300 | 850/2300 | 1000-2300 | 3.96/4.48/4.96/5.52/5.9 | 940 | KTA19-M600, TBD234 V12 |
HCQ400 | 810/1800 | 1000-2300 | 1.5/2.04/2.5/3/3.42/3.77/4.06 /4.61/4.94 |
1100 | KT38-M800, TBD604BL6, 3412TA |
HC400 | 810/1800 | 1000-2300 | 1.5/2.04/2.5/3/3.42/3.77/4.06 /4.61/4.94 |
820 | 3412TA, TBD604BL6 |
HCD400A | 810/1800 | 1000-1800 | 3.96/4.33/4.43/4.476/4.7/5/5.53 /5.7/5.89 |
1100 | KT38-M800, TBD604BL6 |
HCT400A | 945/2100 | 1000-2100 | 6.09/6.49/6.93/7.42/7.95/8.4 /9/9.47 |
1450 | KT38-M800, 6BD604BL6 |
HCT400A/1 | 945/2100 | 1000-2100 | 8.15/8.69/9.27/10.6/11.46/12 | 1500 | KTA38-M800, 3412TA, TBD604BL6 |
HCQ501 | 1265/2300 | 1000-2300 | 1.03/1.46/2/2.45 | 560 | KTA38-M940, 3508B, TBD234 V16 |
HCQ502 | 1265/2300 | 1000-2300 | 2.95 | 700 | KTA38-M940, 3508TA, TBD234 V16 |
HC600A | 1365/2100 | 1000-2100 | 2/2.48/3/3.58/3.89 | 1300 | KTA38-M1045, 3508B, TBD604B V8 |
HCD600A | 1365/2100 | 1000-2100 | 4.18/4.43/4.7/5/5.44/5.71 | 1550 | KTA38-M1045, 3508B, TBD604B V8 |
HCT600A | 1260/2100 | 1000-2100 | 6.06/6.49/6.97/7.51/8.04/8.66/9.35 | 1600 | KTA38-M940, 3508TA, TBD234 V16 |
HCT600A/1 | 1260/2100 | 1000-2100 | 7.69/8.23/8.82/9.47/10.1/10.8 /11.65/12.57/14.44 |
1700 | KTA38-M940, TBD234 V16 |
HCQ700 | 1000-2500 | 1.514 2 2.5 2.783 2.958 | 900 | ||
HCD800 | 1530/1800 | 1000-1800 | 3.429/3.96/4.391/4.905/5.474/5.889 | 1900 | 6190Z1CZ, CW6200, KTA38-M1 |
HCW800 | 1500-1900 | 12.584/13.244/13.945/14.68/ 15.46/15.915/16.285/17.16/ 17.696/18.267/19.078/19.714/ 20.13 |
3800 | ||
HCT800 | 1530/1800 | 800-1800 | 4.95/5.57/5.68/5.93/6.43/6.86 /7.33/7.84 |
2000 | KTA38-M |
HCT800-1 | 800-1800 | 6.91/7.28/7.69/8.12/8.6/9.12 /9.68/10.3/10.98/11.76/12.43 /13.17/13.97/14.85/15.82/16.58 |
3200 | ||
HCT800-3 | 800-1800 | 16.56/17.95/20.2 | 4200 | ||
HC900 | 1440/1600 | 600-1600 | 1.46/2.04/2.47/3/3.6/4.08/4.63/4.95 | 1600 | 12V190DC, M200 |
HCD1000 | 600-1900 | 3.429/3.96/4.391/4.45/4.905/ 5.06/5.474/5.833 |
1900 | ||
HCW1100 | 1500-1800 | 15.882/16.546/17.234/17.973/ 18.74/19.547/20.395 |
6000 | ||
HCT1100 | 1841/1600 | 700-1600 | 5.6/5.98/6.39/6.85/7.35/7.9 | 3000 | CW6200 |
HC1200 | 600-1900 | 2.03/2.5/2.96/3.55/3.79/4.05/4.2/4.47 | 2000 | ||
HC1200-1 | 600-1800 | 3.74 3.95 4.45 5 5.25 5.58 | 2500 | ||
HC1250 | 1654/1800 | 400-1800 | 2.03/2.48/3.04/3.48/3.96 | 2200 | CW8200ZC, 6210ZL, Z12V190 |
HC701 | 1286/2400 | 1200-2400 | 1.93/2.58/2.9/3.26/3.91/4.6/5.17 /6.18/7/7.47 |
2000 | KTA38-M2 |
HCQ1400 | 1000-2100 | 1.517 2 2.476 3 | 1430 | ||
HCA1400 | 1600-2100 | 2.926 | 7 degrees down angle | ||
HCAM1400 | 1600-2100 | 2.926 | |||
HCD1400 | 600-1800 | 4.04/4.27/4.52/4.8/5.045/5.5/ 5.857 |
2800 | ||
HCT1400 | 600-1800 | 4/4.511/5.03/5.52/5.97/6.48/ 7.03/7.5/8.01/8.465/8.593/8.984 /9.118/9.552 |
3700 | ||
HCM1400 | 1000-2100 | 1.477 2.571 2.548 3.074 | 950 | ||
HCQ1600 | 1600-2100 | 1.51 1.97 2.476 2.76 | 1500 | ||
HCQH1600 | 1600-1900 | 2.476 | 1500 | ||
HCQ1601 | 1600-2100 | 3.04 3.24 | 1550 | ||
HCT1600 | 500-1650 | 5.454/5.972/6.585/6.99/7.456/ 7.9/8.45/9/9.5 |
4200 | ||
HCAM500 | 1000-2600 | 1.35 2.034 3 | 500 | 10 degrees down | |
HCD2000 | 600-1500 | 3/3.577/3.958/4.455/4.95/5.263 /5.429/5.75/6.053 |
4000 | ||
HCT2000 | 600-1500 | 5.185/5.494/5.943/6.583/7.012/ 7.483/8/8.57/8.843/9.428/10.05 |
5600 | ||
HCD2700 | 500-1400 | 3.65/4.042/4.5/5.05/5.476/6.105 | 6000 |
origins from Advance.
As for us, we mainly focus in Cummins, who produces most CHINAMFG engine series in China, including:
SN | Models |
1 | 4BT3.9, 6BT5.9, 4ISBE4.5, 6ISBE6.7, QSB4.5, QSB6.7, ISB |
2 | 6CT8.3, L8.9, L9.3, L9.5, ISLe8.9, QSL |
3 | MTA11, QSM, ISME |
4 | ISF2.8, ISF3.8, QSF2.8, QSF3.8 |
5 | ISZ13, QSZ13, ISG |
6 | NT855 |
7 | KT19, KT38, KT50, QSK19, QSK38, etc |
for different applications, such as:
SN | Applications |
1 | diesel generator set |
2 | water pump set, fire pump set |
3 | construction and engineering machinery (crane, excavator, bulldozer, loader, etc) |
4 | Automobile (bus, coach, shuttle, etc) |
5 | marine main propulsion, marine auxiliary generator set |
And besides complete engines, we also export a lot of engine parts parts, including:
SN | Part Descriptions |
1 | cylinder head, cylinder block, cylinder liner |
2 | piston, piston ring, conrod |
3 | main bearing, conrod bearing, thrust bearing |
4 | fuel injector, fuel injection pump, common rail |
5 | oil pan gasket, cylinder head gasket |
6 | overhaul gasket kit, upper gasket kit, lower gasket kit |
7 | oil pan |
8 | fuel transfer pump, water pump, oil pump, vacuum pump, power steering pump |
9 | oil filter, fuel filter, fuel water separator, air filter, Etc |
Beyond Cummins, we also deal with many other brands of engines and gearboxes, etc, including:
SN | Brands |
1 | Deutz, MWM |
2 | CAT |
3 | Detroit |
4 | Weichai |
5 | Isuzu |
6 | Komatsu |
7 | Perkins |
8 | Yuchai |
9 | SDEC |
10 | Advance |
11 | Fada |
12 | Jinbei, Brilliance |
13 | Iveco, Yuejin |
14 | WEICHAI |
FAQ:
Question: What is the price ?
Answer: Our prices are determined by various factors, including: Brand, Model, Power, Quantity, Price Term (FOB, CIF, CPT, FCA, etc), Certificates, etc.
Question: What is the MOQ ?
Answer: for complete engine, 1 set; for engine parts, 1 engine set;
Question: Are samples available ?
Answer: Sample order is acceptable, but with higher unit price.
For regular partners, if necessary, free samples are available.
Question: How long is the production cycle (lead time) ?
Answer: for engine parts, we usually have enough stock; for engines, usually around 10-20 days; for stock engine, usually 1 week.
Question: How long is the shipment?
Answer: if by Express, usually 3-4 working days; if by air, usually 3-5 working days; if by sea, 3-7 days to Southeast Asia, 15-20 days to Middle East, South Asia and Australia, 20-25 days to Europe, USA and Africa, 30-35 days to Latin America and other regions.
Question: What are your payment methods ?
Answer: we accept T/T (bank wire transfer), L/C, Western Union, Money Gram, Sigue, Secured Trade through Made-in-China, etc.
Question: Do you supply any other brand ?
Answer: we entered stock engine industry since 2016, mainly focusing in engines in stock, never used, still under good condition, made in US/UK/Germany/Japan/Korea/China, etc. Sometimes we have stocks of other brands than our normal list of brands. Thus, any inquiry is warmly welcomed and we will always do best to support customers. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Marine |
---|---|
Function: | Speed Reduction |
Brand: | Advance |
Model: | 300 |
Maximum Input: | 805HP 2300rpm |
Engine Speed: | 1000-2300rpm |
Samples: |
US$ 3322.4/Set
1 Set(Min.Order) | |
---|
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2024-04-23
China manufacturer Best Price Marine Gearbox HCV120 for Transmission Gearbox with Good quality
Product Description
Product Description
HangZhou ADVANCE MB170 Gearbox
HangZhou ADVANCE produces the best gearbox in China.
The MB170 marine gearbox is suitable for small and medium-sized fishing boats, cargo ships, passenger ships and other types of vessels. It is capable of decelerating speed, reversing clutch direction and bearing propeller thrust.
Driven by vertical heterodyne transmission mechanism, this gearbox has a small size, a large speed ratio and a light weight.
Product Parameters
Input Speed | 1500~2500r/min | ||
Reduction Ratio (i) | 1.97,2.52,3.04,3.54,3.96 | Transmission Capacity (kW/r/min) | 0.039 |
4.50,5.06 | 0.031 | ||
5.47,5.88 | 0.571 | ||
Maneuver Type | Push-pull flexible Shaft | ||
Center Distance | 170mm | ||
Rated Thrust | 16KN | ||
L×W×H | 485*610*656mm | ||
Net Weight | 240kg | ||
Coupling Flywheel | 4135Ca,X6110C,SAE14/11.5/10 | ||
Coupling Housing | 4135Ca,X6110C,SAE1/2/3 |
Product Configuration
CUSTOMIZE YOUR MACHINE
Oil Pressure Gauge and Alarm Device
Oil Temperature Gauge and Alarm Device
SAE Flywheel Housing Options
Hydraulic Pressure Low Alarm
Solenoid Controlled Switch
…….
CONTACT US FOR MORE DETAILS YOU NEED!
Company Profile
Packaging & Shipping
FAQ
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery, Marine |
---|---|
Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
Certificate: | CCS |
Transport Package: | Wooden Box |
Specification: | 485*610*656mm, 240kg |
Trademark: | Hangzhou Advance |
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2024-03-14
China best Wb Micro Cycloidal Speed Reducer Accessories Marine Gearbox for Mechanical Equipment with Best Sales
Product Description
WB Micro Cycloidal Speed Reducer Accessories Marine Gearbox for Mechanical Equipment
ZHangZhoug Xiafeng Precision Die Casting Co., Ltd., we specialize in the design, development, production, and sales of pump accessories, valve accessories, amusement park accessories, gas station accessories, aluminum die casting, aluminum metal crafts, electric vehicle accessories, pneumatic actuator accessories, gearbox gears, gearbox housings, primary gears, infinite gears, machine base shells, stepless speed control covers, and aluminum machine base.
Product Description
Gearbox Castings
Our Worm gearbox reducer has many items for your choosing and we can produce as per your drawing or sample to meet your special request
We can also supply Gearbox, agricultural gearbox, planetary gearbox, worm gearbox, CHINAMFG gearbox, marine gearbox, gearbox, reduction gearbox, transmission gearbox, gearbox, mower gearbox, rotary cutter gearbox, small transmission gearbox, gearbox for conveyor, bevel gearbox, helical gearbox, swing gearbox, variable speed gearbox, differential gearbox, small planetary gearbox, reducer gearbox, tiller gearbox, pto gearbox, gearbox reducer, hollow shaft gearbox, speed reduction gearbox, industrial gearbox, planetary reduction gearbox, lawn mower gearbox, rotary tiller gearbox, gearbox transmission, worm reduction gearbox, aluminum gearbox, forklift gearbox, nmrv 075 worm gearbox, nmrv030 worm gearbox, shaft mounted gearbox, nmrv 050 worm gearbox, gearbox for agricultural machinery, power tiller gearbox, manual worm gearbox, spiral bevel gearbox, nmrv gearbox, worm wheel gearbox, reduce speed gearbox, industrial transmission gearbox, worm reducer gearbox, gearbox rpm reducer, helical gearbox reducer, wheel planetary gearbox, nmrv040 worm gearbox, worm gearbox reducer, nmrv worm gearbox, aluminium worm gearbox, gearbox reduction, rv series worm gearbox, worm speed gearbox, nmrv050 worm gearbox, gear reducer, worm gear reducer, helical gear reducer, gear speed reducer, worm gear speed reducer, shaft mounted gear reducer, planetary gear reducer, helical gear speed reducer, worm CHINAMFG reducer, speed gear reducer, bevel gear reducer, planetary gear speed reducer, spur gear reducer, aluminum worm gear reduce, nmrv worm gear reducers, helical-worm gear reducer, helical bevel gear reducers, high speed gear reducer, gear speed reducers, industrial gear reducer, high torque gear reducer
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is low.
11. Parallel axis-bevel wheel speed-down motor.
See the below features:
Size: 40mm—160mm
Reduction ratio: 3 — 512
Torque transmission: 5 Nm — 8 95 Nm
Precision backlash: ≤ 5arcmin
Running noise: 51 70 dB (A)
Product Parameters
Name | WB micro cycloidal reducer accessories |
Material | Aluminum Alloy |
Brand | ZHangZhoug Xiaofeng |
Product features | Sturdy and stable |
Application | Construction equipment/mechanical equipment, etc |
Detailed Photos
Feature
Application
Company Profile
ZHangZhoug Xiafeng Precision Die Casting Co., Ltd. is a company located in Oubei, HangZhoua, HangZhou, known as the “hometown of pumps and valves”. We specialize in the design, development, production, and sales of pump accessories, valve accessories, amusement park accessories, gas station accessories, aluminum die casting, aluminum metal crafts, electric vehicle accessories, pneumatic actuator accessories, gearbox gears, gearbox housings, primary gears, infinite gears, machine base shells, stepless speed control covers, and aluminum machine base.
FAQ
Q1 : Could I put my own logo on it?
A : Sure, We accept OEM and ODM.
Q2 : What is your sample policy?
A : We can supply the sample, but the customers have to pay the shipping cost.
Q3 : Could I produce according to the samples?
A : Of course. we can produce by your samples or technical drawing, We can build the molds.
Q4 : How long is production time?
A : Based on the quantities sample order 7-15 days, mass order 30-60days.
Q5 : Do you test all your goods before delivery?
A : Of course, We have 100% test before delivery.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Construction Equipment/Mechanical Equipm |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Conical – Cylindrical Gear |
Step: | Double-Step |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2024-01-12
China Standard Wholesale Price China CZPT Marine Gearbox Ma125 Marine Gearbox Gearbox for Sale cvt gearbox
Product Description
Product Description
HangZhou ADVANCE MA125 Gearbox
HangZhou ADVANCE produces the best gearbox in China.
The MA125 marine gearbox is capable of decelerating speed, reversing clutch direction and bearing propeller thrust. It is suitable for small fishing boats, traffic boats, lifeboats and other types of small vessels.
The MA125 gearbox is mechanically operated, has a small size and a light weight.
Product Parameters
Input Speed | 1500~3000r/min | ||
Reduction Ratio (i) | 2.03,2.46 | Transmission Capacity (kW/r/min) | 0.02 |
3.04 | 0.018 | ||
3.57 | 0.016 | ||
4.05 | 0.014 | ||
4.39 | 0.013 | ||
4.7 | 0.011 | ||
Maneuver Type | Push-pull flexible Shaft | ||
Center Distance | 125mm | ||
Rated Thrust | 5.5KN | ||
L×W×H | 291*454*485mm | ||
Net Weight | 115kg | ||
Coupling Flywheel | SAE 11.5/10 | ||
Coupling Housing | SAE 2/3/4 |
Product Configuration
CUSTOMIZE YOUR MACHINE
Oil Pressure Gauge and Alarm Device
Oil Temperature Gauge and Alarm Device
SAE Flywheel Housing Options
Hydraulic Pressure Low Alarm
Solenoid Controlled Switch
…….
CONTACT US FOR MORE DETAILS YOU NEED!
Company Profile
Application: | Machinery, Marine |
---|---|
Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
Certificate: | CCS |
Transport Package: | Wooden Box |
Specification: | 291*454*485mm, 115kg |
Trademark: | Hangzhou Advance |
Importance of Lubrication in Gearbox Performance
Lubrication plays a critical role in ensuring the optimal performance, longevity, and reliability of gearboxes. Proper lubrication provides several key benefits:
- Reduces Friction and Wear: Lubrication forms a protective layer between gear teeth, bearings, and other moving components, reducing friction and minimizing wear and tear.
- Heat Dissipation: Lubricants help dissipate the heat generated during gear operation, preventing overheating and potential damage to components.
- Noise Reduction: Adequate lubrication can dampen noise and vibration produced by gear meshing, leading to quieter and smoother operation.
- Sealing and Contaminant Prevention: Lubricants create a barrier that seals out contaminants like dust, dirt, and moisture, preventing their entry and reducing the risk of corrosion and damage.
- Enhanced Efficiency: Proper lubrication reduces energy losses due to friction, improving the overall efficiency of the gearbox.
- Extended Lifespan: Lubrication helps prevent premature component wear and failure, extending the lifespan of the gearbox and minimizing the need for costly repairs or replacements.
- Optimal Performance: Gearboxes operate within specified tolerances when properly lubricated, ensuring they deliver the intended performance and functionality.
It’s essential to use the recommended lubricant type, viscosity, and change intervals specified by the gearbox manufacturer to ensure the best possible performance and longevity. Regular monitoring and maintenance of lubrication levels are crucial to preserving the health of the gearbox and its components.
editor by CX 2023-11-17
China Standard Advance Marine Gearbox Hct400A Is Suitable for Fishing and Engineering Boats. supplier
Product Description
Advance Marine Gearbox HCT400A is suitable for fishing, tug and various engineering boats.
Marine Gearbox HCT400A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in small in volume, large in ratio, light in weight and higher loading capacity.
Input speed | 1000-2100r/min | ||
Reduction ratio | 6.09,6.49,6.93 | Trans. capacity | 0.331kw/r/min |
7.42 | 0.309 kw/r/min | ||
7.95 | 0.287kw/r/min | ||
8.40 | 0.265 kw/r/min | ||
9.00,9.47 | 0.243 kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 82KN | ||
Center distance | 375mm | ||
L×W×H | 784×992×1130mm | ||
Net weight | 1450kg | ||
Flywheel | SAE18,16,14 | ||
Bell housing | SAE0,1 |
Marine Gearbox HCT400A/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, larger ratio, and higher loading capacity.
Input speed | 1000-2100r/min | ||
Reduction ratio | 8.15,8.69,9.27 | Trans. capacity | 0.331kw/r/min |
9.94 | 0.316 kw/r/min | ||
10.60 | 0.297kw/r/min | ||
11.37 | 0.274 kw/r/min | ||
12.00 | 0.262 kw/r/min | ||
14.00 | 0.204 kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 120KN | ||
Center distance | 465mm | ||
L×W×H | 869×1100×1275mm | ||
Net weight | 1500kg | ||
Flywheel | SAE18,16,14 | ||
Bell housing | SAE0,1 |
Marine Gearbox HCT2000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 600-1500r/min | ||
Reduction ratio | 5.185,5.494,5.943, 6.583,7.012,7.483,8 |
Trans. capacity | 1.48kw/r/min |
8.57 | 1.42kw/r/min | ||
8.843 | 1.34kw/r/min | ||
9.428 | 1.23kw/r/min | ||
10.05 | 1.21kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 280KN | ||
Center distance | 625mm | ||
L×W×H | 1284x1600x1835mm | ||
Net weight | 5600kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | NO |
Marine Gearbox HCT1600 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 500-1650r/min | ||
Reduction ratio | 5.545,5.972,6.585, 6.99,7.456,7.9 |
Trans. capacity | 1.213kw/r/min |
8.45 | 1.104kw/r/min | ||
9 | 1.104kw/r/min | ||
9.5 | 0.93kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 250KN | ||
Center distance | 585mm | ||
L×W×H | 1246x1500x1750mm | ||
Net weight | 4200kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | No |
Marine Gearbox HCT1400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 600-1800r/min | ||
Reduction ratio | 4,4.511,5.03,5.52,5.97, 6.48,7.03,7.50,8.01 |
Trans. capacity | 1.03kw/r/min |
8.465 | 1kw/r/min | ||
8.593 | 0.96kw/r/min | ||
8.984 | 0.93kw/r/min | ||
9.118 | 0.90kw/r/min | ||
9.552 | 0.85kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 220KN | ||
Center distance | 550mm | ||
L×W×H | 1306x1380x1750mm | ||
Net weight | 3700kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | No |
Marine Gearbox HCT1200 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 700-1600r/min | ||
Reduction ratio | 5.05,5.60,5.98,6.39, 6.85,7.35,7.90 |
Trans. capacity | 0.93kw/r/min |
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 150KN | ||
Center distance | 500mm | ||
L×W×H | 1188*1350*1547mm | ||
Net weight | 3050kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | SAE00 0 |
Marine Gearbox HCT1100 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 700-1800r/min | ||
Reduction ratio | 4.94,5.60,5.98,6.39 | Trans. capacity | 0.846kw/r/min |
6.85 | 0.835kw/r/min | ||
7.35 | 0.772kw/r/min | ||
7.90 | 0.736kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 150KN | ||
Center distance | 500mm | ||
L×W×H | 1150x1350x1547mm | ||
Net weight | 3000kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | SAE00 0 |
Marine Gearbox HCD800 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 600-1800r/min | ||
Reduction ratio | 3.0,3.429,3.960,4.167,4.391 | Trans. capacity | 0.625kw/r/min |
4.905 | 0.588kw/r/min | ||
5.474 | 0.551kw/r/min | ||
5.889 | 0.515kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 110KN | ||
Center distance | 450mm | ||
L×W×H | 1056x1280x1341mm | ||
Net weight | 2200kg | ||
Flywheel | SAE21,18,16 | ||
Bell housing | SAE00,0 |
Marine Gearbox HCD600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and large in ratio.
Input speed | 1000-2100r/min | ||
Reduction ratio | 4.18,4.43 | Trans. capacity | 0.48kw/r/min |
4.70 | 0.46kw/r/min | ||
5.00 | 0.44kw/r/min | ||
5.44,5.71 | 0.4kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 90KN | ||
Center distance | 415mm | ||
L×W×H | 745x1094x1271mm | ||
Net weight | 1550kg | ||
Flywheel | SAE21,18,16,14 | ||
Bell housing | SAE00,0 |
Marine Gearbox HCD400A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and high in loading capacity.
Input speed | 1000-1800r/min | ||
Reduction ratio | 3.96,4.33,4.43,4.476,4.70,5.00 | Trans. capacity | 0.331kw/r/min |
5.53 | 0.293 kw/r/min | ||
5.70,5.89 | 0.272kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 82KN | ||
Center distance | 355mm | ||
L×W×H | 641×950×988mm | ||
Net weight | 1100kg | ||
Flywheel | SAE18,16,14 | ||
Bell housing | SAE0,1 |
Marine Gearbox HCD2700 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 500-1400r/min | ||
Reduction ratio | 3.65,4.042,4.5,5.05 | Trans. capacity | 2.05kw/r/min |
5.476 | 1.96kw/r/min | ||
6.105 | 1.7kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 280KN | ||
Center distance | 630mm | ||
L×W×H | 1400x1780x1530mm | ||
Net weight | 6000kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | NO |
Marine Gearbox HCD2000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 600-1500r/min | ||
Reduction ratio | 3,3.577,3.958,4.455,4.95 | Trans. capacity | 1.48kw/r/min |
5.263 | 1.42kw/r/min | ||
5.429 | 1.34kw/r/min | ||
5.75 | 1.23kw/r/min | ||
6.053 | 1.21kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 220KN | ||
Center distance | 560mm | ||
L×W×H | 1600*1620*1645mm | ||
Net weight | 4000kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | NO |
Marine Gearbox HCD1400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 600-1800r/min | ||
Reduction ratio | 4.04,4.27,4.52,4.8,5.045,5.5 | Trans. capacity | 1.03kw/r/min |
5.857 | 0.778kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 175KN | ||
Center distance | 485mm | ||
L×W×H | 1260*1380*1360mm | ||
Net weight | 2800kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | NO |
Marine Gearbox HCD138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in large in ratio, small in volume and light in weight.
Input speed | 1000-2500r/min | ||
Reduction ratio | 5.05,5.63 | Trans. capacity | 0.110kw/r/min |
6.06 | 0.099kw/r/min | ||
6.47 | 0.093kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 40KN | ||
Center distance | 296mm | ||
L×W×H | 494×800×870mm | ||
Net weight | 415kg | ||
Flywheel | 6135Ca,SAE14,11.5 | ||
Bell housing | 6135Ca,SAE1,2 |
Marine Gearbox HCD1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
Input speed | 600-1900r/min | ||
Reduction ratio | 3.429,3.96,4.391,4.45,4.905,5.06 | Trans. capacity | 0.735kw/r/min |
5.474 | 0.68kw/r/min | ||
5.833 | 0.65kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 140KN | ||
Center distance | 450mm | ||
L×W×H | 1082*1280*1345mm | ||
Net weight | 1900kg | ||
Flywheel | SAE21,18 | ||
Bell housing | SAE00,0 |
Marine Gearbox HC600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
Input speed | 1000-2100r/min | ||
Reduction ratio | 2.00,2.48,3.00 | Trans. capacity | 0.48kw/r/min |
3.58 | 0.44kw/r/min | ||
3.89 | 0.40kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 90KN | ||
Center distance | 320mm | ||
L×W×H | 745*1094*1126mm | ||
Net weight | 1300kg | ||
Flywheel | SAE18,16,14 | ||
Bell housing | SAE00,0 |
Marine Gearbox HC400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and high in loading capacity.
Input speed | 1000-1800r/min | ||
Reduction ratio | 1.50,1.77,2.04,2.50,2.86,3.00,3.42 | Trans. capacity | 0.331kw/r/min |
4.06 | 0.279 kw/r/min | ||
4.61,4.94 | 0.190 kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 82KN | ||
Center distance | 264mm | ||
L×W×H | 641×950×890mm | ||
Net weight | 820kg | ||
Flywheel | SAE18,16,14 | ||
Bell housing | SAE0,1 |
Marine Gearbox HC300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, and light in weight.
Input speed | 700-2500r/min | ||
Reduction ratio | 1.5,1.87,2.04,2.23,2.54,3,3.53 | Trans. capacity | 0.257kw/r/min |
4.1,4.47 | 0.2kw/r/min | ||
4.61 | 0.184kw/r/min | ||
4.94 | 0.147kw/r/min | ||
5.44 | 0.13kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 50KN | ||
Center distance | 264mm | ||
L×W×H | 680×930×880mm | ||
Net weight | 680kg | ||
Flywheel | 12V135,12V150,SAE18,16,14 | ||
Bell housing | 12V135,12V150,SAE0,1 |
Marine Gearbox HC138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and large in ratio.
Input speed | 1000-2500r/min | ||
Reduction ratio | 2.0,2.52,3.00,3.57,4.05,4.45 | Trans. capacity | 0.110kw/r/min |
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 30KN | ||
Center distance | 225mm | ||
L×W×H | 520×792×760mm | ||
Net weight | 360kg | ||
Flywheel | 6135Ca,SAE14,11.5 | ||
Bell housing | 6135Ca,SAE1,2,3 |
Marine Gearbox HC1250 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
Input speed | 400-1800r/min | ||
Reduction ratio | 2.032,2.481,3.043,3.476 | Trans. capacity | 0.919kw/r/min |
3.947 | 0.850kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 140KN | ||
Center distance | 390mm | ||
L×W×H | 1155x1330x1435mm | ||
Net weight | 2200kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | No |
Marine Gearbox HC1200 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
Input speed |
600-1900r/min |
||
Reduction ratio |
1.6,2.03,2.476,2.5,2.96,3.55 |
Trans. capacity |
0.93kw/r/min |
3.79 |
0.88kw/r/min |
||
4.05 |
0.80kw/r/min |
||
4.20 |
0.695kw/r/min |
||
4.47 |
0.650kw/r/min |
||
Control way |
Push-and-pull flexible shaft, electrically, pneumatically |
||
Rated thrust |
120KN |
||
Center distance |
380mm |
||
L×W×H |
1082x1200x1130mm |
||
Net weight |
2000kg |
||
Flywheel |
Depend on engine flywheel |
||
Bell housing |
SAE00 0 |
Marine Gearbox HC1200/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and easy in dismantle & reassemble and maintain.
Input speed | 600-1800r/min | ||
Reduction ratio | 3.74,3.95,4.45 | Trans. capacity | 0.93kw/r/min |
5 | 0.833kw/r/min | ||
5.25 | 0.695kw/r/min | ||
5.58 | 0.65kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 140KN | ||
Center distance | 450mm | ||
L×W×H | 1096x1260x1270mm | ||
Net weight | 2500kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | SAE00 0 |
Marine Gearbox HC1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure and easy in dismantle & reassemble and maintain.
Input speed | 600-1900r/min | ||
Reduction ratio | 2,2.5,3.04,3.48 | Trans. capacity | 0.735kw/r/min |
4.06 | 0.65kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 110KN | ||
Center distance | 335mm | ||
L×W×H | 1082x1120x990mm | ||
Net weight | 1700kg | ||
Flywheel | Depend on engine flywheel | ||
Bell housing | SAE00,0 |
Marine Gearbox 40A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
Input speed | 750-2000r/min | ||
Reduction ratio | 2.07,2.96 | Trans. capacity | 0.030kw/r/min |
3.44 | 0.571kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically | ||
Rated thrust | 8.8KN | ||
Center distance | 142mm | ||
L×W×H | 490×670×620mm | ||
Net weight | 225kg | ||
Flywheel | 4110C,SAE14,11.5 | ||
Bell housing | 4110C,SAE1,2,3 |
Marine Gearbox 26 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
Input speed | 1000-2500r/min | ||
Reduction ratio | 2.5,3 | Trans. capacity | 0.0199kw/r/min |
3.5 | 0.0190kw/r/min | ||
4 | 0.0177kw/r/min | ||
Control way | Manually | ||
Rated thrust | 5KN | ||
Center distance | 135mm | ||
L×W×H | 473.5×365×830mm | ||
Net weight | 92kg | ||
Flywheel | 4105C | ||
Bell housing | 4105C |
Marine Gearbox 16A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
.
Input speed | 1000-2000r/min | ||
Reduction ratio | 2.07,2.48,2.95,3.35,3.83 | Trans. capacity | 0.012kw/r/min |
Control way | Manually | ||
Rated thrust | 3.5KN | ||
Center distance | 135mm | ||
L×W×H | 422×325×563mm | ||
Net weight | 84kg | ||
Flywheel | 2105C 395,SAE11.5,10 | ||
Bell housing | 2105C 395,SAE3,4 |
Marine Gearbox 135 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
Input speed | 750-2000r/min | ||
Reduction ratio | 2.03,2.59,3.04,3.62,4.11 | Trans. capacity | 0.10kw/r/min |
4.65 | 0.093kw/r/min | ||
5.06 | 0.088kw/r/min | ||
5.47 | 0.077kw/r/min | ||
5.81 | 0.070kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically | ||
Rated thrust | 29.4KN | ||
Center distance | 225mm | ||
L×W×H | 578×744×830mm | ||
Net weight | 470kg | ||
Flywheel | 6135Ca,SAE14 | ||
Bell housing | 6135Ca,SAE1 |
Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
Input speed | 750-1800r/min | ||
Reduction ratio | 2.03,2.81 | Trans. capacity | 0.088kw/r/min |
3.73 | 0.044kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically | ||
Rated thrust | 25KN | ||
Center distance | 190mm | ||
L×W×H | 605×744×770mm | ||
Net weight | 400kg | ||
Flywheel | 6135Ca,4120,SAE14 | ||
Bell housing | 6135Ca,4120,SAE1 |
Marine Gearbox 06 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
Input speed | 1000-2100r/min | ||
Reduction ratio | 2.52,3.05,3.50 | Trans. capacity | 0.004kw/r/min |
Control way | Manually | ||
Rated thrust | 1.8KN | ||
Center distance | 124mm | ||
L×W×H | 350×316×482mm | ||
Net weight | 58kg | ||
Flywheel | 195C | ||
Bell housing | 195C |
ADVANCE Marine Gearbox D300A is suitable for fishing, tug, engineering and transport boats
Marine Gearbox D300A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
Marine Gearbox 300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
Input speed | 1000-2500r/min | ||
Reduction ratio | 4.00 | Trans. capacity | 0.257kw/r/min |
4.48 | 0.243kw/r/min | ||
5.05 | 0.221kw/r/min | ||
5.52,5.90 | 0.184kw/r/min | ||
6.56,7.06 | 0.147kw/r/min | ||
7.63 | 0.125kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 60KN | ||
Center distance | 355mm | ||
L×W×H | 786×980×1041mm | ||
Net weight | 940kg | ||
Flywheel | 12V135,SAE18,16,14 | ||
Bell housing | 12V135,SAE0,1 |
Input speed | 750-2500r/min | ||
Reduction ratio | 1.87,2.04,2.54 | Trans. capacity | 0.257kw/r/min |
3.00 | 0.243kw/r/min | ||
3.53 | 0.221kw/r/min | ||
4.10,4.47,4.61 | 0.184kw/r/min | ||
4.94 | 0.147kw/r/min | ||
5.44 | 0.125kw/r/min | ||
Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
Rated thrust | 50KN | ||
Center distance | 264mm | ||
L×W×H | 786×930×864mm | ||
Net weight | 740kg | ||
Flywheel | 12V135,12V150,SAE18,16,14 | ||
Bell housing | 12V135,12V150,SAE0,1
|
Application: | Marine |
---|---|
Function: | Speed Reduction |
Layout: | Cycloidal |
Hardness: | Soft Tooth Surface |
Installation: | Oscillating Base Type |
Step: | Double-Step |
Customization: |
Available
| Customized Request |
---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2023-11-14